Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Use Wi-Fi Direct™ > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)

Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)

DocuPrint M225 dw/DocuPrint M225 z
DocuPrint M265 z

DocuPrint M225 dw/DocuPrint M225 z

If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi Direct network:
  1. Press Menu.
  2. Press or to select the Network option, and then press OK.
  3. Press or to select the Wi-Fi Direct option, and then press OK.
  4. Press or to select the Group Owner option, and then press OK.
  5. Press or to select the On option, and then press OK.
  6. Press or to select the Push Button option, and then press OK.
  7. When Wi-Fi Direct On? appears, enable the Wi-Fi Direct network.
  8. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device and press OK. appears on the machine's LCD. Press OK on your machine.
    This will start the Wi-Fi Direct setup. To cancel, press Clear.
  9. If your mobile device connects successfully, the machine's LCD displays Connected. You have completed the Wi-Fi Direct network setup.

DocuPrint M265 z

If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi Direct network.
When the machine receives the Wi-Fi Direct request from your mobile device, the message Wi-Fi Direct connection request received. Press [OK] to connect. will appear on the LCD. Press OK to connect.
  1. Press (Settings)>All Settings>Network>Wi-Fi Direct>Group Owner.
  2. Press On.
  3. Swipe up or down or press or to select the Push Button option. Press Push Button.
  4. When Wi-Fi Direct On? appears, press On to accept. To cancel, press Off.
  5. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device. Then Press [OK]. appears on the machine's LCD. Press OK on your Fuji Xerox machine.
    This will start the Wi-Fi Direct setup. To cancel, press .
  6. If your mobile device connects successfully, the machine's LCD displays Connected. You have completed the Wi-Fi Direct network setup.
Related Information

Go to top of page