Home > Scan > Scan from Your Computer (Windows®) > Scan Using ControlCenter4 Advanced Mode (Windows®) > Scan Both Sides of a Document Automatically Using ControlCenter4 Advanced Mode (Windows®)

Scan Both Sides of a Document Automatically Using ControlCenter4 Advanced Mode (Windows®)

Related Models:DocuPrint M265 z

Select Advanced Mode as the mode setting for ControlCenter4.

  1. Load documents in the ADF.
    To scan both sides of a document automatically, you must use the ADF, not the flatbed scanner glass.
  2. Click the (ControlCenter4) icon in the task tray, and then click Open.
  3. Click the Scan tab.
  4. Click the button for the setting you want to change (Image, OCR, E-mail, or File).
    The scan settings dialog box appears.
  5. Select the 2-sided Scanning check box.
  6. Select the Long-edge binding or Short-edge binding option, depending on document layout (see table for layout examples).
    2-sided Scan setting Original layout Scan Result
    Long-edge binding
    Short-edge binding
  7. Change the scan settings, such as file format, file name, destination file path, resolution, or colour, if needed.
    • To change the file name or Destination File Path, click Change.
  8. Click Scan.
    The machine starts scanning.
You have now changed the default settings for your selected Scan-to action. These settings will be used the next time one of the scan options (Image, OCR, E-mail, or File) is selected for this action.
Related Information

Go to top of page