Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Use Wi-Fi Direct™ > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-Push Method

Configure Your Wi-Fi Direct Network Using the One-Push Method

DocuPrint M225 dw/DocuPrint M225 z
DocuPrint M265 z

DocuPrint M225 dw/DocuPrint M225 z

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
  1. Press Menu.
  2. Press or to select the Network option, and then press OK.
  3. Press or to select the Wi-Fi Direct option, and then press OK.
  4. Press or to select the Push Button option, and then press OK.
  5. When Wi-Fi Direct On? appears, enable the Wi-Fi Direct network.
  6. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device and press OK. appears on the machine's LCD. Press OK on your machine.
    This will start the Wi-Fi Direct setup. To cancel, press Clear.
  7. Do one of the following:
    • When your Fuji Xerox machine is the Group Owner (G/O), connect your mobile device to the machine directly.
    • When your Fuji Xerox machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Press or to select the mobile device you want to connect to and press OK. Search for available devices again by pressing Rescan.
  8. If your mobile device connects successfully, the machine's LCD displays Connected. You have completed the Wi-Fi Direct network setup.

DocuPrint M265 z

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network.
When the machine receives the Wi-Fi Direct request from your mobile device, the message Wi-Fi Direct connection request received. Press [OK] to connect. will appear on the LCD. Press OK to connect.
  1. Press (Settings)>All Settings>Network>Wi-Fi Direct>Push Button.
  2. When Wi-Fi Direct On? appears, press On to accept. To cancel, press Off.
  3. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device. Then Press [OK]. appears on the machine's LCD. Press OK on your machine.
    This will start the Wi-Fi Direct setup. To cancel, press .
  4. Do one of the following:
    • When your Fuji Xerox machine is the Group Owner (G/O), connect your mobile device to the machine directly.
    • When your Fuji Xerox machine is not the G/O, it displays available device names with which to configure a Wi-Fi Direct network. Select the mobile device you want to connect to and press OK. Search for available devices again by pressing Rescan.
  5. If your mobile device connects successfully, the machine's LCD displays Connected. You have completed the Wi-Fi Direct network setup.
Related Information

Go to top of page