Home > Fax > Dial and Store Fax Numbers > Additional Dialling Operations > Combine Address Book Numbers

Combine Address Book Numbers

Related Models:DocuPrint M225 z / DocuPrint M265 z
Sometimes you may want to choose from several long-distance carriers when you send a fax. Rates may vary depending on the time and destination. To take advantage of low rates, you can store the access codes of long-distance carriers and credit card numbers as Address Book numbers.

You can store these long dialling sequences by dividing them and setting them up as separate Address Book numbers in any combination. You can even include manual dialling using the dial pad.

For example: You might have stored '01632' and '960555' in your machine as shown in the following table.

Applicable Models

'01632' stored in

'960555' stored in

2-Line LCD models

Quick Dial: 003

Quick Dial: 002

Touchscreen LCD models

Address Book: Fuji Xerox 1

Address Book: Fuji Xerox 2

You can use them both to dial '01632-960555' by following procedure.

DocuPrint M225 z
DocuPrint M265 z

DocuPrint M225 z

  1. Press (Fax).
  2. Press twice, 003.
  3. Press twice, 002 and Start.
    The machine will dial '01632-960555'.

To temporarily change a number, you can substitute part of the number by pressing it using the dial pad. For example, to change the number to '01632-960556', you could enter the number (01632) using Quick Dial 003, and then press 960556 using the dial pad.

If you must wait for another dial tone or signal at any point in the dialling sequence, create a pause in the number by pressing Redial/Pause.

DocuPrint M265 z

  1. Press (Fax)>Address Book.
  2. Press or to display the number of Fuji Xerox 1.
  3. Press the number.
  4. Press Apply.
  5. Press Options.
  6. Press or to display the Address Book option, and then press it.
  7. Press or to display the number of Fuji Xerox 2.
  8. Press the number.
  9. Press Apply.
  10. Press Fax Start.
    The machine will dial '01632-960555'.

To temporarily change a number, you can substitute part of the number by pressing it using the LCD. For example, to change the number to '01632-960556', you could enter the number (Fuji Xerox 1: 01632) using Address Book, press Apply, and then press 960556 using the LCD.

If you must wait for another dial tone or signal at any point in the dialling sequence, create a pause in the number by pressing Pause.

Related Information

Go to top of page