Home > Machine Settings > General Settings > Set the Continue Mode

Set the Continue Mode

The Continue Mode forces the machine to continue printing after the control panel displayed Replace Toner indication.

The machine will continue printing until the LCD displays Toner Ended indication.

The factory setting is Stop.

  • When the control panel indicates an error, you cannot change the mode.
  • If you continue printing in the Continue Mode, we cannot guarantee the print quality.
  • While using Continue Mode the print may appear faint.
  • After replacing the toner cartridge with a new one, the Continue Mode will go back to the default setting (Stop).

DocuPrint M225 z
DocuPrint M265 z

DocuPrint M225 z

  1. Press Menu.
  2. Press or to display the General Setup option, and then press OK.
  3. Press or to display the Replace Toner option, and then press OK.
  4. Press or to display the Continue or Stop option, and then press OK.
  5. Press Stop/Exit.

DocuPrint M265 z

  1. Press (Settings)>All Settings>General Setup>Replace Toner.
  2. Press Continue or Stop.
  3. Press .
Related Information

Go to top of page