Wired LAN

TCP/IP

BOOT Method

-

Select the BOOT method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

(up to 32 characters)

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the IP address of the primary DNS server.

Secondary

Specify the IP address of the secondary DNS server.

APIPA

-

Set the machine to automatically allocate the IP address from the link-local address range.

IPv6

-

Turn the IPv6 protocol on or off.

Ethernet

-

-

Select the Ethernet link mode.

Wired Status

-

-

View the current wired status.

MAC Address

-

-

View the MAC address of the machine.

Set to Default

-

-

Restore the wired network setting to the factory setting.

Wired Enable

-

-

Turn the Wired LAN on or off manually.

WLAN

TCP/IP

BOOT Method

-

Select the BOOT method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

(up to 32 characters)

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the IP address of the primary DNS server.

Secondary

Specify the IP address of the secondary DNS server.

APIPA

-

Set the machine to automatically allocate the IP address from the link-local address range.

IPv6

-

Turn the IPv6 protocol on or off.

WLAN Assistant

-

-

Configure your wireless network settings using the Fuji Xerox CD-ROM.

Setup Wizard

-

-

Configure your internal print server manually.

WPS/AOSS

-

-

Configure your wireless network settings using the one-button push method.

WPS w/ PIN Code

-

-

Configure your wireless network settings using WPS with a PIN.

WLAN Status

Status

-

View the current wireless network status.

Signal

-

View the current wireless network signal strength.

SSID

-

View the current SSID.

Comm. Mode

-

View the current Communication Mode.

MAC Address

-

-

View the MAC address of the machine.

Set to Default

-

-

Restore the wireless network setting to the factory setting.

WLAN Enable

-

-

Turn wireless network connection On.

Wi-Fi Direct

Push Button

-

-

Configure your Wi-Fi Direct™ network settings using the one-button push method.

PIN Code

-

-

Configure your Wi-Fi Direct™ network settings using WPS with a PIN code.

Manual

-

-

Configure your Wi-Fi Direct™ network settings manually.

Group Owner

-

-

Set your machine as the Group Owner.

Device Information

Device Name

-

View the device name of your machine.

SSID

-

View the SSID of the Group Owner.

When the machine is not connected, LCD displays Not Connected.

IP Address

-

View the current IP Address of your machine.

Status Information

Status

-

View the current Wi-Fi Direct™ network status.

Signal

-

View the current Wi-Fi Direct™ network signal strength.

When your machine acts as Group Owner, the LCD always indicate a strong signal.

I/F Enable

-

-

Turn the Wi-Fi Direct™ connection on or off.

E-mail/IFAX

(Available after Internet Fax (I-Fax) is downloaded)

Mail Address

-

-

Enter the mail address.

(Up to 60 characters)

Setup Server

SMTP

Server

Enter the SMTP server name and address.

Port

Enter the SMTP port number.

Auth. for SMTP

Select the Security method for email notification.

POP3/IMAP4

Protocol

Select the protocol for receiving an email from the server.

Server

Enter the server name and address.

Port

Enter the port number.

Mailbox Name

Enter the mail box name.

(Up to 60 characters)

Mailbox Password

Enter the password to login to the server.

(Up to 32 characters)

Select Folder

Select the specified folder in the email box using the IMAP4 protocol.

APOP

Turn APOP on or off.

Setup Mail RX

Auto Polling

Auto Polling

Automatically checks the server for new messages.

Poll Frequency

Set the interval for checking for new messages on the server.

Header

-

Select the contents of the mail header to be printed.

Del/Read Error Mail

-

The POP3 server deletes error mails automatically. The IMAP4 server deletes error mails automatically after you read them.

Notification

-

Receive notification messages.

Setup Mail TX

Sender Subject

-

View the subject that is attached to the Internet Fax (I-Fax) data.

Size Limit

-

Limit the size of email documents.

Notification

-

Send notification messages.

Setup Relay

Relay Broadcast

-

Relay a document to another fax machine.

Relay Domain

-

Register the Domain name.

Relay Report

-

Print the relay Broadcast Report.

Manual Receive

-

-

Manually check the POP3 or IMAP4 server for new messages.

Web Connect Settings

Proxy Settings

Proxy Connection

-

Change the Web connection settings.

Address

-

Port

-

User Name

-

Password

-

Fax to Server

(Available after Internet Fax (I-Fax) is downloaded)

Fax to Server

-

-

Select the network connection type.

Prefix

-

-

Suffix

-

-

Network Reset

-

-

-

Restore all network settings back to the factory settings.