Home > Machine Settings > General Settings > Set the Mode Timer

Set the Mode Timer

Related Models:DocuPrint M225 dw / DocuPrint M225 z
The machine returns to the default mode after use of the machine in a mode other than the default mode. The Mode Timer setting defines how much time the machine takes after the last operation to return to the default mode. If you choose Off, the machine will stay in the mode you used last.
  • For DocuPrint M225 z, the machine has three mode buttons on the control panel: FAX, SCAN and COPY.
  • For DocuPrint M225 dw, the machine has Scan and Copy. Default is Copy mode and mode timer setting is one minute.
  1. Press Menu.
  2. Press or to display the General Setup option, and then press OK.
  3. Press or to display the Mode Timer option, and then press OK.
  4. Press or to display the 5 Mins, 2 Mins, 1 Min, 30 Secs, 0 Sec, or Off option, and then press OK.
  5. Press Stop/Exit.
Related Information

Go to top of page