Setup Receive

Receive Mode

-

Select the Receive Mode that best suits your needs.

Ring Delay

-

Set the number of rings before the machine answers in Fax or Fax/Tel mode.

F/T Ring Time

-

Set the length of the pseudo/double-ring time in Fax/Tel mode.

Fax Detect

-

Receive fax messages automatically when you answer a call and hear fax tones.

Remote Codes

-

Answer calls at an extension telephone and use codes to turn the machine on or off. You can personalize the codes.

Auto Reduction

-

Reduce the size of incoming faxes.

PC Fax Receive

-

Sets the machine to send faxes to your computer.

You can turn on the Backup Print safety feature.

Memory Receive

-

Set the machine to forward fax messages or to store incoming faxes in the memory (so you can retrieve them while you are away from your machine).

If you select Fax Forward, you can turn on the Backup Print safety feature.

Anti-Junk Fax

Register

Register the specific fax numbers to the blocked list to avoid receiving faxes from the numbers.

Delete

Print the received time and date on the top of the received faxes.

Print Reports

Print received faxes on both sides of the paper.

Fax Rx Stamp

-

Print the received time and date on the top of the received faxes.

2-sided

-

Print received faxes on both sides of the paper.

Setup Send

Coverpage Setting

Print Sample

Print a sample of the fax cover page. You can fill in information and fax it with your document.

Coverpage Note

Set up your own comments for the fax cover page.

Auto Redial

-

Set the machine to redial the last fax number after five minutes if the fax did not go through because the line was busy.

Destination

-

Set the machine to display the destination information on the LCD during fax sending.

Report Setting

Transmission

-

Select the initial setup for the Transmission Verification Report.

Journal Period

Journal Period

Set the interval for automatic printing of the Fax Journal.

If you select other than Off and Every 50 Faxes, you can set the time for the option.

If you select Every 7 Days, you can set the day of the week.

Time

If you select other than Off and Every 50 Faxes, you can set the time for the option.

If you select Every 7 Days, you can set the day of the week.

Day

If you select Every 7 Days, you can set the day of the week.

Print Document

-

-

Print incoming faxes stored in the memory.

Remote Access

-

-

Set your own code for Remote Retrieval.

Dial Restriction

Dial Pad

-

Set the machine to restrict dialling when using the dial pad.

Address Book

-

Set the machine to restrict the dialling when using the Address Book.

Shortcuts

-

Set the machine to restrict the dialling when using a Shortcut.

Remaining Jobs

-

-

Check which scheduled jobs are in the memory and cancel selected jobs.

Miscellaneous

Distinctive

(Not available in New Zealand.)

Distinctive

Turn on the telephone company's Distinctive Ring subscriber service to register your new ring pattern on the machine.

FaxAbility

(For New Zealand.)

-

If you have FaxAbility from Telecom, you can use this function to store the ringing pattern of your fax number. And if you set in to ON, you should use the registered number only.

Call Waiting

(For New Zealand.)

-

If you have Call Waiting service, you can use this function to answer second call when you are on the phone and someone rings you.

Caller ID

(Available only for some countries.)

-

Enable or disable to see the number (or name) of the party calling you.