Home > Scan > Scan from Your Computer (Windows®) > Scan Using ControlCenter4 Home Mode (Windows®) > Scan Photos and Graphics Using ControlCenter4 Home Mode (Windows®) > Select Document Type Using ControlCenter4 Home Mode (Windows®) > Custom Scan Settings (Windows®)

Custom Scan Settings (Windows®)

Select Custom in the Document Type list to change advanced scan settings.
  • Select Custom, and then click the Custom Settings button.
    The Custom Scan Settings dialog box appears.

    You can change the following settings:

    Resolution
    Select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image.
    Scan Type
    Select from a range of scan colour depths.
    • Auto
      Use for any type of document. This mode automatically picks an appropriate colour depth for the document.
    • Black & White
      Use for text or line art images.
    • Gray (Error Diffusion)
      Use for photographic images or graphics. (Error Diffusion is a method for creating simulated grey images without using true grey dots. Black dots are put in a specific pattern to give a grey appearance.)
    • True Gray
      Use for photographic images or graphics. This mode is more accurate because it uses up to 256 shades of grey.
    • 24bit Color
      Use to create an image with the most accurate colour reproduction. This mode uses up to 16.8 million colours to scan the image, but it requires the most memory and has the longest transfer time.
    Brightness
    Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark, set a higher brightness level and scan the document again. You can also type a value into the field to set the Brightness level.
    Contrast
    Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes dark and light areas of the image, while a decrease reveals more details in grey areas. You can also type a value into the field to set the Contrast level.
    Continuous Scanning
    Select this option to scan multiple pages from the flatbed or ADF. After a page is scanned, either continue scanning or finish. Use this method to scan more pages than the maximum ADF capacity.
    2-sided Scanning
    Select this check box to scan both sides of the document. When using the Automatic 2-sided Scan feature, you must select the Long-edge binding or Short-edge binding option, depending on the layout of your original, to make sure the data file you create appears correctly.

    (DocuPrint M265 z)

    ID Card Scan

    Select this check box to scan both sides of the identification card onto one page.

    Advanced Settings
    Configure advanced settings by clicking the Advanced Settings button in the Scan Settings dialog box.
    • Remove Background Color
      Remove the base colour of documents to make the scanned data more legible. Choose from three settings: high, medium, and low.

      (available only for the Auto, True Gray and 24bit Color options)

    • Skip Blank Page
      Remove blank pages of the document from the scanning results.

      (DocuPrint M265 z)

    • Display Scanning Results
      Show the numbers of total pages saved and blank pages skipped on your computer screen.

      (DocuPrint M265 z)

Related Information

Go to top of page