Home > Machine Settings > General Settings > Change the Default Mode

Change the Default Mode

Related Models:DocuPrint M225 dw / DocuPrint M225 z
When the machine is idle or you press Stop/Exit, the machine will return to the mode you set.
  • For DocuPrint M225 z, the machine has FAX, SCAN and COPY modes. Factory setting is FAX mode.
  • For DocuPrint M225 dw, the machine has Scan and Copy modes. The Copy mode is fixed default mode.
  1. Press Menu.
  2. Press or to display the General Setup option, and then press OK.
  3. Press or to display the Default Mode option, and then press OK.
  4. Press or to display the Fax, Copy, or Scan option, and then press OK.
  5. Press Stop/Exit.
Related Information

Go to top of page