Home > Introduction to Your Fuji Xerox Machine > For Touchscreen Models > How to Navigate the Touchscreen LCD

How to Navigate the Touchscreen LCD

Related Models:DocuPrint M265 z

Press your finger on the LCD to operate it. To display and access all the options, press or on the LCD to scroll through them.

The following steps explain how to navigate through changing a machine setting. In this example, the LCD Backlight setting is changed from Light to Med.

IMPORTANT
DO NOT press the LCD with a sharp object such as a pen or stylus. It may damage the machine.
NOTE
DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this may cause an error.
  1. Press (Settings).
  2. Press All Settings.
  3. Press or to display the General Setup option, and then press General Setup.
  4. Press or to display the LCD Settings option, and then press LCD Settings.
  5. Press Backlight.
  6. Press Med.
  7. Press .
Related Information

Go to top of page