Home > ControlCenter > ControlCenter2 (Macintosh) > Use Remote Setup to Set Up the Fuji Xerox Machine with ControlCenter2 (Macintosh)

Use Remote Setup to Set Up the Fuji Xerox Machine with ControlCenter2 (Macintosh)

Related Models:DocuPrint M225 z / DocuPrint M265 z

If the Secure Function Lock is set to On, you cannot use Remote Setup.

  1. In the Finder menu bar, click Go>Applications>Fuji Xerox, and then double-click the (ControlCenter2) icon.
    The ControlCenter2 screen appears.
  2. Click the DEVICE SETTINGS tab.
  3. Click the Remote Setup button.
    The Remote Setup Program screen appears.
  4. Configure the settings as needed.
    Export
    Click to save the current configuration settings to a file.
    Click Export to save your address book or all settings for your machine.
    Import
    Click to read the settings from a file.
    Print
    Click to print the selected items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine, and then click Print.
    OK
    Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, enter the correct data again, and then click OK.
    Cancel
    Click to exit the Remote Setup Program without uploading data to the machine.
    Apply
    Click to upload data to the machine without exiting the Remote Setup Program.
  5. When finished, click OK.
Related Information

Go to top of page