Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Use the Remote Codes > Change the Remote Codes

Change the Remote Codes

Related Models:DocuPrint M225 z / DocuPrint M265 z

The preset Remote Activation Code is *51 (*91 for New Zealand). The preset Remote Deactivation Code is #51 (#91 for New Zealand). If you are always disconnected when accessing your External TAD remotely, try changing the three-digit remote codes using the numbers 0-9, *, #.

DocuPrint M225 z
DocuPrint M265 z

DocuPrint M225 z

  1. Press (Fax).
  2. Press Menu.
  3. Press or to display the Fax option, and then press OK.
  4. Press or to display the Setup Receive option, and then press OK.
  5. Press or to display the Remote Codes option, and then press OK.
  6. Press or to display the On option, and then press OK.
    • To turn off Remote Codes, select the Off option.
  7. Enter the new Remote Activation Code, and then press OK.
  8. Enter the new Remote Deactivation Code, and then press OK.
  9. Press Stop/Exit.

DocuPrint M265 z

  1. Press (Settings)>All Settings>Fax>Setup Receive>Remote Codes.
  2. Do one of the following:
    • To change the Remote Activation Code, press Act.Code. Enter the new code, and then press OK.
    • To change the Remote Deactivation Code, press Deact.Code. Enter the new code, and then press OK.
    • If you do not want to change the Codes, go to the next step.
    • To turn off (or turn on) the Remote Codes, press Remote Codes, and then press Off (or On).
  3. Press .
Related Information

Go to top of page