Home > Machine Settings > General Settings > Learn About the Receiving faxes in Continue Mode

Learn About the Receiving faxes in Continue Mode

Related Models:DocuPrint M225 z / DocuPrint M265 z
The machine can store received faxes in the memory if you choose Continue Mode when the LCD displays Replace Toner.

When received faxes are printed in Continue Mode the LCD will ask if the print quality of the fax is OK.

If the quality is not good, choose No. The machine will keep the faxes stored in the memory so you can reprint them after you replace the toner cartridge with a new one. If the print quality is good, choose Yes. The LCD will ask if you want to delete the printed faxes from the memory.

If you choose not to delete them, you will be asked again after you replace the toner cartridge with a new one.

  • (DocuPrint M225 z/DocuPrint M265 z)

    The machine can store up to 500 faxes in memory.

  • (DocuPrint M225 z)

    If you turn off the power switch faxes in memory will be lost.

  • The machine will keep faxes stored in Continue Mode even if you change the Continue setting to Stop.
  • If you install a new toner cartridge when the LCD displays Toner Ended, the machine will ask if you want to print the stored faxes. Choose Print to print stored faxes.

Toner End in Continue Mode

When the LCD displays Toner Ended, the machine will stop printing. If the memory is full and you want to continue receiving faxes, you must install a new toner cartridge.

Go to top of page