Home > Fax > Receive a Fax > Remote Retrieval > Set a Remote Access Code

Set a Remote Access Code

Related Models:DocuPrint M225 z / DocuPrint M265 z
Set a Remote Access Code to access and control your Fuji Xerox machine even when you are away from it.
Before you can use the remote access and retrieval features, you must set up your own code. The factory default code is the inactive code (---*).
DocuPrint M225 z
DocuPrint M265 z

DocuPrint M225 z

  1. Press Menu.
  2. Press or to display the Fax option, and then press OK.
  3. Press or to display the Remote Fax Opt option, and then press OK.
  4. Press or to display the Remote Access option, and then press OK.
  5. Enter a three-digit code using the numbers 0 to 9, * or # using the dial pad, and then press OK.
    • To make your code inactive, press Clear to delete the three-digit code in this step. Then press OK.
    • You cannot change the preset *.

    • DO NOT use the same code used for your Remote Activation Code (*51) (*91 for New Zealand) or Remote Deactivation Code (#51) (#91 for New Zealand) .

  6. Press Stop/Exit.

DocuPrint M265 z

  1. Press (Settings)>All Settings>Fax>Remote Access.
  2. Enter a three-digit code using the numbers 0 to 9, * or # using the the LCD (The preset '*' cannot be changed), and then press OK.
    • DO NOT use the same code used for your Remote Activation Code (*51) (*91 for New Zealand) or Remote Deactivation Code (#51) (#91 for New Zealand).
    • To make your code inactive, press and hold to restore the inactive setting (---*), and then press OK.
  3. Press .
Related Information

Go to top of page